DIY 4l60e transmissions are a stronger transmission than average. If you own a 4l60e transmission, then your transmission has the capabilities of an overdrive transmission. However, high mileage or damage to your transmission can cause it to underperform and eventually burn itself out. Here are some tips on how to repair your 4l60e transmission.
Take it to a Mechanic
This is self-explanatory, really, but you should take your vehicle to a mechanic as soon as possible. The mechanic will take a look at your vehicle’s transmission and tell you exactly what’s wrong with it. It could be something as small as needing more fluid or something as big as having one of the gears missing completely. Whatever it is, your mechanic will fix it for you.
Identify the Source of the Problem Yourself
If you are good with cars, then you probably know how to tell what is wrong with the transmission just by looking at it. However, you are probably reading this article because you don’t know about cars. Check the transmission fluid first to make sure that there is enough fluid in the tank. If there isn’t, friction could cause the transmission to overheat.
If there is enough transmission fluid, then check your oil level and get an oil change if need be. While this may not be a direct source of the problem, it could be one of the many factors effecting your transmission’s capabilities. Afterwards, check to see if your check engine light is blinking.
If your check engine light is blinking, then that is the sign of a serious problem. While it could be anything, chances are that there is something wrong with your transmission. Make sure to get it checked out as soon as possible by a local auto store or your mechanic. You don’t want to drive with bad transmission for too long as you could make an already expensive problem potentially more expensive.
Repair Vs. Rebuild
Although you can get your transmission repaired for cheaper, a transmission rebuild might be necessary if there are missing or obsolete parts. A rebuild uses newer parts while a repair just fixes older parts that are already attached to your transmission. In order to cover the cost of the new parts, a rebuild is priced higher. Ask your mechanic for a quote on a repair versus a rebuild.
DIY 4l60e transmissions are very specific and strong transmissions to deal with. They need specific parts that your mechanic will know how to get and fix. Keep an open line of communication with your mechanic because you are going to need it. Get a quote before going ahead with any procedures because chances are that quote is probably going to be pretty pricey. You don’t want to go spending money that you don’t have and wind up having to pay the debt off in payment installments. As soon as you detect a problem with your transmission, get it checked out because you don’t want to make an already expensive problem even more expensive.